ABOUT CREST STYLE 11

This design features a basic shield topped with a beaver insignia inspired by the image on the Canadian nickel. The shield is flanked by three maple leaves on each side which rise from a furled banner on which the family name is displayed. A motto may be arrayed above or below, if desired.
The width-to-height ratio of this crest is 1:1.08 -- very nearly square.

This Canadian-themed crest shows the family insignia to good advantage. It is suitable for applications where a squarish design is best. 

You should select the largest size crest that will fit your project.

ABOUT CREST STYLE 12

This design features a basic shield topped with an eagle insignia that pays homage to the American animal emblem. The shield is flanked either side by flaming torches emerging from a furled banner on which the family name is displayed. A motto may be arrayed above or below, if desired.
The width-to-height ratio of this crest is 1:1.16 -- close to square.

This American-themed crest shows the family insignia to good advantage. It is suitable for applications where a squarish design is best. 

You should select the largest size crest that will fit your project.

ABOUT CREST STYLE 13

This design features a shield in elegant-traditional style topped with either a royal crown or a motif taken from the family iconography.  The family name appears on a furled banner beneath the shield. A motto may be arrayed above or below, if desired.
The width-to-height ratio of this crest is 1:1.08 --  almost exactly square.

This elegant crest with no extraneous mantling is ideal for displaying any family insignia. It is suitable for applications where a squarish design is best. 

You should select the largest size crest that will fit your project.

ABOUT CREST STYLE 3

In this design, a  pointed shield is surmounted by a front-facing knight's helmet surrounded by flared mantling ribbons and resting on a straight banner on which the family name is displayed.

The width-to-height ratio of this crest is 1:0.99 -- just slightly wider than it is tall (nearly square). It is not suitable for applications requiring a narrow, "tall" design.

Bear in mind that the more elaborate the mantling and banner, the smaller the insignia. You should select the largest size crest that will work for your project.

ABOUT CREST STYLE 15

A basic shield mantled both sides with cascading ivy and surmounted by  knight's helmet. A furled banner below bears the family name.

The width-to-height ratio of this crest is 1:1.22 --just under one quarter taller than it is wide.

The relatively large size of the shield portion of this crest, along with its traditional elements, make it a good choice for displaying family insignia.

You should select the largest size crest that will fit your project.

ABOUT CREST STYLE 16

This non-traditional shield design was inspired by the coat of arms created for the family of Kate Middleton. It is trimmed with a scallop-effect border and topped with a ribbon bow .  The family name is arrayed beneath.

The width-to-height ratio of this crest is 1:1.67 --approximately two thirds taller than it is wide.

The simple border on this crest makes it a good choice to display the motif on the shield, and its elongated style makes it suitable for applications where a tall, thin design is desirable.

ABOUT CREST STYLE 17

This design was inspired by one of the badge styles used by the Royal Canadian Air Navy. A round shield with wide border features a rope motif with maple leaf, and is surmounted by a nautical crown. The family motto is displayed on a bordered plaque just below the crown.
The width-to-height ratio of this crest is 1:1.30 --approximately one third taller than it is wide.

This crest has a good-sized field available for displaying the family insignia, but not all images are suitable for the round format. You should choose the largest crest that will fit your project.

ABOUT CREST STYLE 18

A basic shield with slightly rounded point is surmounted by  an ornate forward-facing knight's helmet with plumes. Elaborate two-color ribbon mantling flares out from either side of the shield.

The width-to-height ratio of this crest is 1:1.26 --just over one quarter taller than it is wide.

The more elaborate the mantling or banner, the smaller the shield bearing insignia. This crest with its ornate mantling works is best stitched in larger sizes, and for this reason is not available in smaller than 5" size.

You should select the largest size crest that will fit your project.

ABOUT CREST STYLE 19

This design was inspired by one of the badge styles used by the Royal Canadian Air Force. A round shield with wide border rests on a furled banner. The border is flanked by a cascade of maple leaves, and surmounted by a royal crown. The family motto is written on the border, with the name featured on the banner below.

The width-to-height ratio of this crest is 1:1.14 --just a little taller than it is wide.

With its wide border and relatively small field for displaying the family insignia, this crest may not be suitable for detailed or complex insignia unless you plan to stitch it in a larger size. You should choose the largest crest that will fit your project.

ABOUT CREST STYLE 20

This simple shield design features no mantling or addtional trim and showcases family insignia well. The family name is shown in a border across the top of the shield.

The width-to-height ratio of this crest is 1:1.31 --just under a third taller than it is wide. It's great for making patches to be attached to items that can't otherwise be embroidered, and is available in sizes from 2" to 6".